When you click default, your VPN firewall settings will be erased. The time remaining before this rule is released and made available for other. Check Yes to enable E-mail Logs. Log Identifier is a mandatory field used to identify which device sent the log messages. Then set the Day and Time fields that correspond to your selection.
Incoming traffic using one. For each PC or device, the following data is displayed. This timer is restarted whenever incoming or outgoing traffic is received. This is required in order for scheduling to work correctly. Enter a Schedule for sending the logs. Then enter the user name and password to be used for authentication. You must manually restart the VPN firewall in order for the default settings to take effect.
For each PC or device, the following data is displayed.
Univex ProSafe FVSG. Upgrading the Firmware. Page 10
This will change if you upgrade. To view the router configuration and system status:. When you click default, your VPN firewall settings will be erased.
Displays the limit for the current month. If you have not enabled the Traffic Meter, these statistics are not available. The Ident Protocol is a weak scheme sgudy verify the sender of e-mail a common daemon program for providing the ident service is identd.
FVSGEUS , FVSGEUS Product Comparison at Systemsassurance
This is the Account Name that you entered in the Basic Settings page. If your ISP charges by traffic volume over a given period of time, or if you want to study traffic types over a period of time, you can activate the Traffic Meter for one or both WAN ports. Both incoming and outgoing traffic are included in the limit. The LAN Setup screen will display.
Then enter the user name and password to be used for authentication. Monitoring System Performance Incoming traffic using one.
Univex ProSafe FVS336G User Manual
Log entries are described in Table To view the current version of the firmware that your VPN firewall is running, choose Monitoring from the main menu.
Figure Monitoring System Performance. The traffic meter will record the volume of Internet traffic passing through the WAN1. Locate the downloaded file and click upload.
Fsv336g and other LAN devices become known by the following methods: The identifier is appended to log messages. You must have e-mail notification enabled to receive the logs in an e-mail message.
Click Yes to enable SysLogs and send messages to the syslog server, then:.
The IP address of the initiating device for this log entry. This timer is restarted whenever incoming or outgoing traffic stuy received. The Router Status screen is displayed.
To download a firmware version: Only E-mail traffic will be allowed. The Router Status screen provides status and usage information.
Click the Traffic by Protocol link, in the upper right header, to see a report of the Internet traffic by type. As this information is read-only, any changes must be made on other pages. Fill in the time fields and choose AM or PM and the day of the month from the pull-down menus.
Network Time Protocol NTP is a protocol that is used to synchronize computer clock times in a network of computers. In the When limit is reached section, make the following choice: This chapter contains the following sections: Click Yes to enable SysLogs stydy send messages to the syslog server, then: If you don’t have e-mail notification enabled, you can view the logs by clicking the View Logs option arrow to the right of the tab.